1. Overview of Rigging a Small Sailboat
In this guide, you’ll learn how to rig a small sailboat to prepare for sailing. A Hunter 140 daysailer is used for this tutorial. Before starting, familiarize yourself with the various parts of a sailboat.
2. Install (or Check) the Rudder
Typically, the rudder of a small sailboat is removed after sailing to prevent wear and tear. Ensure it is securely reinstalled before you set sail. It may be directly installed or require checking for security.
3. Attach (or Check) the Tiller
The tiller is a long steering arm mounted to the rudder. Confirm that it’s secure if already attached, or attach the tiller and secure it in place.
4. Attach the Jib Halyard
Before rigging the sails, remember to remove them from exposure to weather whenever possible. The halyards can raise the jib and mainsail and should be attached securely.
5. Hank the Jib on the Forestay
Hanking on the jib requires ensuring that the halyard is gripped securely. Open each hank and clip it onto the forestay, gradually raising the sail.
6. Run the Jibsheets
The jib sheets are crucial for adjusting the jib’s position. Ensure both sheets are tied to the clew and run back to the cockpit, securing as necessary.
7. Attach Mainsail to Halyard
Attach the mainsail halyard to the head of the mainsail, confirming its security, and prepare to secure the sail’s tack.
8. Secure the Mainsail’s Tack
Secure the tack at the bow end of the mainsail, ensuring it aligns properly with the boom. This completes the anchoring of the leading edge of the sail.
9. Secure the Mainsail Clew to the Outhaul
The clew of the mainsail should be secured to the aft end of the boom with an outhaul to tension its foot properly.
10. Insert the Mainsail Slugs in the Mast
Attach the mainsail’s luff to the mast by sliding the slugs into the groove, raising the sail gradually to ensure proper alignment.
11. Continue Raising the Mainsail
Raise the mainsail completely, ensuring battens are positioned correctly to maintain sail shape. Confirm that everything is secured and aligned.
12. Cleat the Main Halyard
When the mainsail is fully raised, tension it and cleat the halyard. It’s crucial to ensure that all elements are secure and ready for action.
13. Start Moving
With both sails raised, adjust the mainsheet and one jibsheets. If needed, turn the boat to fill the sails effectively. Be aware of the wind direction to avoid being stalled.
